Tuesday, December 20, 2011

Another Snow Globe Ornament


Hello everyone! It's time for my monthly post on The BugBytes and I am going to share with you another snowglobe ornament, like the one I made for the blog hop, but this one is a little more grown up. I also took a few more pictures so hopefully it is clearer how it all comes together!

 The details: 
So this is a very similar process to my previous post, I begin with a two piece ornament from Micheals and a  3.05 circle cut out of a recycled cartridge clamshell. Then I placed my scene on the acetate with black and white vinyl. The Santa (1 inch), trees (1.80 inch) and the church (1 inch) are from the Christmas solutions cartridge. I cut each image twice (once regular and once flipped) so that it looks the same from both sides. So this is what it looks like before I assemble it.


I filled the two halves with snowflake glitter and then I get ready to place the acetate inside. In this picture you can see there is an inner lip where the circle will fit (ignore badly manicured finger):


The circle fits in perfectly cut at that size and then I have one half of my ornament complete. 


And then I carefully slide the other side of the ornament in and add a ribbon to the top to keep it together. I didn't think it was necessary to add glue until I came home and saw what my two year old had done to it when my husband was "watching" her *SIGH* all that wasted glitter.


Apologies for the bad picture, but I think Yukon Jack is peeking out there to say hi! I hope these instructions help in understanding the process a little better and I really hope there are some of these left on clearance by the time I get to Michael's again!

Friday, December 9, 2011

Holiday Blog Hop & Snow Globe Ornaments

Hello all! Today is the Holiday Blog Hop for the BugBytes Design Team. This is your last stop on the hop and you should have arrived here from Melissa's blog, and when you are done, make sure to go back to Pam at TheBugBytes so that you can add your holiday project to the linky! If you are joining this party already in progress you can also start the hop with Pam's blog!

Apologies to my regular followers for being a bad blog mommy lately and neglecting my blog, I have projects done just no time to write the posts! And more apologies to the hoppers because I really love this project but it totally does not meet the requirements of having red or green or silver or blue. So what my migraine medicine is telling me is that I should go with my inner lawbreaker and say since there is purple in this project and red + blue = purple then this project qualifies. Yeah - let's go with that!!





The details: 

This is a snowglobe ornament that I picked up at Michael's  - they come in two pieces and allow you to place something in the middle. I decided that they were dying to be made into snowglobes and I have had this idea for a long time - so glad it actually worked out! This is also another one of my "recycling" projects because I used my cartridge clamshells as the center of the ornament! (I have a few clamshell pieces....or perhaps a alot). My original photos are taken on my daughter's purple Christmas tree so I thought I would take some without the distracting background so the directions would be clearer.

 I cut a 3.05 inch circle out of the clamshell using my Gypsy - and yes it has to be that size - 3 inches is too small and 3.10 is too big and then placed a 2 inch snowman from Winter Frolic cut in vinyl with some of the layers on one side of the plastic circle. I flipped the image and all the layers and placed the other snowman on the other side of the plastic circle, layering it as exactly as I could over the first snowman. I stamped two different snowman faces using my Peachy Keen Stamps and Stazon ink and colored in the nose with an orange sharpie. I felt like he needed some bling and I especially appreciated I could use two different kinds - one for each side! Who wants buttons when you can have MS mini bling??

I added some Martha Stewart snowflake glitter to one half of the ornament, placed the circle over it, added glitter to the other half and sandwiched them all together. I did add some glue to the inside rim but I am not sure a) that it was necessary or b) that it really worked. Since this was going in my daughter's room I mixed some glow in the dark glitter with the snowflake glitter too, but you can only see it when the lights are out. Oh well - it was still fun!

This project just reinforced my love of vinyl + acetate - they are a match made in crafting heaven! My only regret is I only bought two of these ornaments which means a trip to Micheals is now a necessity and I don't know when I will have the time! I will strive to post my other snowglobe ornament next week.

Make sure you go back to Pam at TheBugBytes and particpate in the linky party! And in case you need it, here is the full blog hop list:

  1. Pam 
  2. Jeannie  
  3. Jen 
  4. Carole
  5. Lisa Brooks 
  6. Audrey  
  7. Mila
  8. Sheila aka sassylady 
  9. Elizabeth 
  10. Kelly Millet 
  11. Dayna Sabrina 
  12. Lori   
  13. Denine Vajja
  14. Melissa 
  15. Allison - you are here! :)    


I hope you found lots of inspiration and have a wonderful holiday season! Happy crafting!